Izicelo

Uthotho lwe-HWM131 lusebenzisa amandla okudibanisa i-DIN rail amanqanaba amathathu e-elektroniki asebenzayo kunye ne-reactive integrationimithas. Basebenzisa ubuchwepheshe obuninzi obuphambili bophando nophuhliso, njenge-microelectronic-techniques, i-IC enkulu ekhethekileyo (isekethe edibeneyo), iteknoloji yesampulu yedijithali kunye nokucubungula, ubuchule be-SMT, njalo njalo. Ukusebenza kwabo kobugcisa kuhambelana ngokupheleleyo neMigangatho yeHlabathi ye-IEC 62053-21 yeKlasi yoku-1 yamandla asebenzayo esigaba sesithathu.imithakunye neMigangatho yeHlabathi i-IEC 62053 -23 yemitha yamandla esabelayo yesigaba sesi-2 sesigaba sesithathu. Zingalinganisa ngokuchanekileyo amandla asebenzayo omthwalo kunye namandla asabelayo kwiinethiwekhi ze-AC zesigaba sesine ze-frequency ezilinganisiweyo ezingama-50Hz okanye ama-60Hz. Uthotho lwe-HWIM131 lunezicwangciso ezininzi zokukhetha, ukuze zilungele iimfuno ezahlukeneyo zemarike. Zineempawu ezinokuthembeka okuhle kakhulu ixesha elide, umthamo omncinci, ubunzima obuphantsi, inkangeleko egqibeleleyo, ukufakwa okulula, njl.

Imisebenzi kunye neempawu

◆ Ifumaneka njenge-35mm DIN standard rail efakelwe, ehambelana neMigangatho DIN EN 50022. kunye ne-front PANEL efakelwe (umgama ophakathi phakathi kwemingxunya emibini yokufaka yi-63mm).

◆ Iindlela ezimbini ezifakelweyo apha ngasentla azinyanzelekanga ukuba zisetyenziswe.

◆ ububanzi beepali ezili-10 (imodulus eyi-12 .5mm), ehambelana neMigangatho JB/T7121-1993.

◆ Ungakhetha izibuko lonxibelelwano lwedatha olungaphakathi olune-infrared kunye nezibuko lonxibelelwano lwedatha le-RS485. Iprotocol yonxibelelwano ihambelana neMigangatho ye-DL/T645-1997. Enye iprotocol yonxibelelwano nayo inokuba lukhetho.

◆ Uqhagamshelo lwe-S (ucingo lokungena oluvela ezantsi kunye nocingo lokuphuma oluphezulu) luneentlobo ezimbini; uqhagamshelo oluthe ngqo kunye noqhagamshelo lwe-CT ukhetho. Kuqhagamshelo lwe-CT, kukho iintlobo ezingama-27 zamazinga e-CT ekufuneka zisetwe, emva kokuseta izinga le-CT, singafunda imitha ngokuthe ngqo, akukho mfuneko yokuphindaphinda izinga le-CT.

◆ Imitha yoqhagamshelwano ngqo inamanani ayi-6+1 e-LCD 999999.1).

◆ Imitha yoqhagamshelwano lwe-CT inamanani asi-7. Umboniso we-LCD: amanani ama-5+2 (kwizinga le-CT kuphela yi-5:5A) okanye amanani asi-7, kuxhomekeke kwizinga le-CT elisetweyo.

◆ Ungakhetha ibhetri ye-lithium engenasondlo ngaphakathi ukuze isibonisi se-LCD sifunde imitha ngelixa umbane ucinyiwe.

◆ Ixhotyiswe ngee-terminals ezimbini ze-polarity passive impulse output: amandla asebenzayo kunye namandla asebenzayo.

◆ Isantya sokukhupha i-output impulse sineentlobo ezi-4: 0.01, 0.1,1, 10 kWh okanye kvarh/Pulse, umsebenzisi anokuyiseta kulo naluphi na uhlobo olufunekayo, ngokuhambelana neMigangatho ye-IEC 62053–31 kunye ne-DIN 43864.

◆ Ii-LED zibonisa ngokwahlukileyo imeko yamandla kwisigaba ngasinye, isignali yempembelelo yamandla kunye nemeko yonxibelelwano lwedatha.

◆ Ukuchongwa ngokuzenzekelayo kwendlela yokuhamba komsinga womthwalo kwaye kuya kuboniswa yi-LED.

◆ Linganisa ukusetyenziswa kwamandla kwicala elinye kwizigaba ezintathu, ezingahambelaniyo kwaphela nolwalathiso lokuhamba komsinga womthwalo, ngokuhambelana neMigangatho ye-IEC 62053-21 kunye ne-IEC 62053-23.

◆ Isiciko sesiphelo esifutshane senziwe ngePC ecacileyo, ukunciphisa indawo yokufaka kwaye kulula ukuyifaka kwindawo enye.